Shipping to the Continental US and Canada - International Buyers Must Call for a Shipping
number 1 enemy of any water ionizer is scale buildup inside the plate
cell. More specifically, scale buildup on the membranes that are
between the plates.
this occurs your ionizer cannot separate Acidic and Alkaline minerals
properly and OPR and PH are reduced. Regardless of how well your
ionizers self clean function works, scale or mineral build up will
eventually overtake your plate cell- even if you have soft water!!
Remember that your ionizer concentrates minerals in the plate cell,
which is part of how higher PH levels are created.
Ionizer Armor® easily snaps on your cold water line under the
sink, as the cold water passes through the directional magnetic field
of the Armor, the water goes through some very advantageous changes.
The ability of scaling minerals to stick anywhere is dramatically
reduced. Our in-house testing has shown a
40-60% reduction in scale buildup, not only in the plate cell but
inside the entire machine.
Scaling minerals are abrasive. This
abrasiveness is extremely hard on the platinum coating on your plates,
this is why ionizer plates last a lot longer in “soft water”
conditions. After passing through the Ionizer Armor®'s field, these
minerals become far less abrasive protecting the plate coating in the
Lower surface tension! Yes, Ionizer Armor®
can achieve minor micro-clustering of the water even before it enters
the ionizer! This gives you even more absorbable water than with an
No more white flaky buildup in glasses and containers.
This is a common complaint of ionized water users. Because ionized
water is rich in minerals, when the water dries up in a container you
will see the dried up mineral deposits. Not with the Ionizer Armor® in
place, your glasses and containers will remain clear!
Improved water frequency. There’s a lot of
buzz lately about vibrational frequencies and health, most of us have
seen the EMF necklaces and Q ray bracelets for years now--some ionizer
brands have even added laser lights and other methods to the ionizers
to improve the healthy vibrations of the water. These are new methods
and while they may prove beneficial they give you more parts that can
fail inside the ionizer. Ionizer Armor® is a lifetime warranty product
that installs outside the ionizer and has a 50 year track record
(magnetic field water treatment) for safety and effectiveness. After
eight years of testing (as of 2012) we have seen better health results
from customers using the Ionizer Armor® with their ionizers.
Silky smooth texture of the water. Water
that has been through the Ionizer Armor®'s field has a noticeably
silkier feel in the mouth. Try this experiment: Before installing the
Ionizer Armor®, pour a large glass of ionized water. Then install the
Ionizer Armor®, run machine for approximately 20 seconds and then fill
another large glass. Taste both waters and you will “feel” the
difference in your mouth!
High Magnification Pictures
of A Water Droplet with and without Ionizer Armor
Photos taken in the nuclear biochemistry deptartment of a
|Acid Water w/o Ionizer
||Alkaline Water w/o
||Alkaline Water with Ionizer
What is clearly visible is that the ionized water's rise off of the
glass slide in a 75 degree angle, while the Ionizer Armor water rises
as a 90 degree angle. Researchers all over the world believe that water
that has a 90 degree angle is more probable to form hexagonal
clusters, which penetrate cells better and are considered more
ideal for health. You should also notice that the Ionizer Armor droplet
of water is more dense than the regular ionized water, which
illustrates the silkier feeling that those who drink Ionizer Armor
does it work?
water molecules pass by the powerful, highly focused magnetic field,
two things happen: molecules are polarized (organized) and the water
takes on a net positive (+) charge. This physically changes the water's
molecular structure. The result is soft water characteristics with
dissolved minerals, which will protect your water ionizer investment.
of imitators and knock offs!
the first and the original- no one even compares.
We tested various strengths (Gauss) and directional magnetic field
products for over 3 years before choosing the current Ionizer Armor®'s
strength level and field direction. Some of the strengths and direction
combinations we tested actually caused more scale to buildup inside the
machine, some created no results at all. When choosing this type of
Product don’t settle for scam artist’s versions or cheap knock offs,
insist on the first, the original and the highly field tested IONIZER
Armor® is built to last. Should the front and back sections ever fail
to snap together, mail the unit back to the dealer and it will be
replaced free of charge. Ionizer Armor® is made in the USA.
Armor® is not a simple magnet, it is an engineered,
studied and field tested product that uses a precise and directional
field to achieve its superior results, taping a magnet on the water
line will not come close to producing the same results and could cause
damage to you or your machine, trust us, we’ve tried it.